M7 IMPACT WRENCH ANGLE DRIVE, 250 FT/LB, 1/2″ DR

M7-NC4255QH Impact Wrench
Magnesium alloy & composite material construction.
Extremely powerful & very lightweight.
Twin hammer type clutch.
Patented EZ Grease Anvil. Easily grease the hammer mechanism through the center of the anvil, increasing the power output to ‘like new’ after continual use.

41 Piece Set Includes:

• 1/2″ Impact wrench (M7-NC4255QH)
• 1/2″ Torque wrench 42-210Nm
• 250mm Blow gun (M7-JC310)
• Mini lubricator
• 1/2″ 75mm & 125mm Extension bars
• 1/2″ Universal joint
• 1/2″ Impact socket set 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 27, 30, 32mm
• 1/2″ Impact deep socket set 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24mm
• 1/2″ Impact wheel nut sockets 17, 19, 21mm
• EVA insert 540 x 380mm

M7-NC4255QH Impact Wrench

• Square Drive: 1/2″
• Bolt Capacity: 1″ (25mm)
• Torque Range: 200-800 ft-lb / 271-1085 Nm
• Max Torque at 5 seconds: 1200 ft-lb / 1627 Nm
• Free Speed: 8500 RPM
• Air Requirement: 4.8 CFM / 90 PSI / 1/4″ Inlet
• Overall Length: 179mm
• Net Weight: 1.7kg
• Sound Pressure: 85dBA
• Vibration Level: 4.7m/s²